Safeguards temperature-sensitive medical treatments regardless of patient location
Lightweight, portable design makes this a perfect appliance for clinical point-of-use cold storage
Superior Stirling engine reliability scales down to a remarkably small footprint and weight (21 kg, 46 lbs), without sacrificing performance
Provides industry's widest ultra-low temperature range of -20°C to -86°C
Adaptable power input provides operational flexibility between standard AC main outlets, worldwide, as well as vehicle-based 12V DC power or external battery devices
Utilizes 100% natural refrigerants to support sustainable, environmentally-friendly operations Optional SenseAnywhere wireless temperature logging allows
for remote monitoring via cloud-based software
Ample storage capacity for thousands of 2mL vials within a surprising compact frame
Uniquely portable and reliable ultra-low ULT25NEU storage benefits scientists, clinicians and patients alike
Safely preserve and deliver biologic drugs and vaccines at thepoint of patient care, anywhere in the world
Easily deploy long-term storage of viable biological materials, with low power use in any form - battery, 12V vehicle power, or solar panel
Collect temperature-sensitive samples and specimens at remote trial or field locations
Refrigeration System
Cooling Engine: Helium charged free-piston Stirling engine with continuous modulation
Heat Transport System: Gravity driven thermosiphon
Refrigerant: R-170 (Ethane) 10 - 12 grams
Evaporator: Cold wall (inner liner)
Heat Rejection: Finned heat exchanger with forced air cooling
Air inlet: Right front side of unit
Air outlet: Below control panel of front
mechanical compartment
Defrost: Method Manual
Performance Data
Steady State Energy 2.8 kWh/day Use at 25ºC Ambient: 2.8 kWh/day (average power 118 watts) at -80°C (Empty Cabinet)
Pull-Down from 25°C Ambient: 4 hours to -80°C (Empty Cabinet)
Recovery from 1 minute lid opening: 20 minutes to -80°C (Empty Cabinet)
Warm-up Profile: 30 minutes to -60°C (Empty Cabinet), 70 minutes to -40°C (Empty Cabinet)
Heat Dissipation: 403 BTU/h (load to HVAC) (Empty Cabinet)
Controller
Controller Type: Microprocessor controls
Security: Lockable lid
Warm and Cold Alarms: Setpoint ± 10°C
Control Sensor: One RTD (PT100 Class A)
Dry Contacts: Optional Internet Connectivity Optional SenseAnywhere wireless temperature monitoring and logging
Exterior Dimensions: 27.3" (L) x 13.8" (W) x 18.1" (H)
Interior Dimensions: 13.1" (L) x 8.7" (W) x 13.4" (H)
Application: Storage of general (non-flammable) laboratory materials
Storage Volume: 25 liters (0.9 cu.ft.)
Storage Capacity: 18 standard 2” boxes
Temperature Range: -20°C to -86°C @ 32°C (90°F) ambient, uniformity +/- 3°C at -80°C top to bottom, adjustable in 1°C increments Default temperature setting is -80°C.Preset options are -86°C, -40°C and -20°C.
Electric Power: 100V to 240VAC at either 50 or 60Hz or 12V DC from mobile source
Auto-Voltage Capability: 100V to 240V, 50 or 60 Hz
Electric Supply Rating: 15 amp or greater grounded circuit
Noise: Advanced noise abatement, <45 dB(A) at 1 meter
ndoor/Outdoor Use: Indoor use only
Insulation: High performance vacuum insulated panels and polyurethane foam
Gasket Heater: Continuous operation when the power cord is connected
Options: Plastic Utility Bin, AC Power Cords, Mobile Power DC Cord, Sub-Lid, Certificate of Calibration, Temperature Mapping Validation, Remote Alarm Contacts
Weight: 46 lbs
Certification/Agency Listing: CE, cTÜVus
Power Plugs Available
NEMA 5-15P plug requires standard NEMA 5-15R receptacle (120V); Length: 2261 mm (89 in.), or NEMA 5-15P plug requires standardNEMA 15R receptable (120V); Length:3048 mm (120 in.), or NEMA 6-15P plug requires standard NEMA 6-15R receptacle (240V); Length: 2997 mm (118 in.)
Environmental Conditions
Non-corrosive, non-flammable, non-explosive, indoor use, altitude up to 2,000m, temperature 5°C to 40°C (41°F to 104°F), maximum relative humidity 80% for temperature up to 31°C decreasing linearly to 50% at 40°C